Brakes

Showing 1 to 10 of 10 items
Brake Line Caps by CaPlug Brake Line Caps by CaPlug

skygeek

Brake Line Caps by CaPlug

$3.93

These 7/16-24 plugs are handy to have around when swapping your front brake hoses or doing a major frontend overhaul.  The plugs allow you to remove the hose without draining the fluid in your hard...
Brake Calipers, Left & Right, 87-89 Mustang 5.0 Brake Calipers, Left & Right, 87-89 Mustang 5.0

Oreillys

Brake Calipers, Left & Right, 87-89 Mustang 5.0

$144.89

New Or Remanufactured:  Remanufactured Bracket Included:  No Caliper And Pad Hardware Included:  No Bracket Mounting Bolts Included:  No Pads Included:  No Color:  Gray Finish:  Rust Preventative Number Of Pistons:  1 Piston Material:  Steel Bleeder Screw...
Brake Rotors, 87-93, 4-lug Drilled, Slotted Brake Rotors, 87-93, 4-lug Drilled, Slotted

Altered Fox

Brake Rotors, 87-93, 4-lug Drilled, Slotted

$150.00

C-TEK; Sport Drilled/Slotted   Centric C-TEK Drilled & Slotted Rotors provide added bite and improved looks. Zinc coating provides improved protection from corrosion extending service life.   Features & Benefits: Drilled & Slotted for increased...
Brake Hose Locking Clips Brake Hose Locking Clips

RockAuto

Brake Hose Locking Clips

$3.49

When swapping out your brake hoses, go ahead and clean up the place with these new brake hose locks from Foxbody Performance!  These secure the brake hose to the bracket in the front fender wells...
Rear Stainless Steel Braided Hoses for Foxbody with Cobra Rear Disc Brakes Rear Stainless Steel Braided Hoses for Foxbody with Cobra Rear Disc Brakes

FBB

Rear Stainless Steel Braided Hoses for Foxbody with Cobra Rear Disc Brakes

$76.93

You'll need a set of these brake hoses when doing a disc brake conversion on the rear of your foxbody.   Correct hoses for the Cobra Rear brake conversion Banjo fittings on caliper side, 3/8" fittings...
Master Cylinder (15/16") with Hard-line Conversion for 87 to 93 Foxbody Mustang Master Cylinder (15/16") with Hard-line Conversion for 87 to 93 Foxbody Mustang

Altered Fox

Master Cylinder (15/16") with Hard-line Conversion for 87 to 93 Foxbody Mustang

$139.99

This setup is the cleanest and easiest way to install a 15/16" (94-95) Mustang Cobra master cylinder on your 87-93 Foxbody Mustang! The kit includes:15/16" Cobra Master Cylinder3 Hard lines as shown in imageAdapter fitting...
-27%
Proportioning Valve Plug M-2450-A Proportioning Valve Plug M-2450-A

foxbody brakes

Proportioning Valve Plug M-2450-A

-27%

$14.49

$19.98

You'll need this foxbody Mustang proportioning valve plug when converting your 79-93 Mustang to 4-wheel disc brakes.  This seals the factory proportioning/combination valve. The original Ford part number is M-2450-A, but Ford no longer produces this....
Centric Foxbody Mustang Brake Master Cylinder (93 Cobra) Centric Foxbody Mustang Brake Master Cylinder (93 Cobra)

Steeda

Centric Foxbody Mustang Brake Master Cylinder (93 Cobra)

$87.93

If your 1993 Cobra Mustang could use a brake update due to a leaking or worn out master cylinder, replace it with this quality unit from Centric Parts! These master cylinders are a direct replacement...
Brake Hose Set - Stainless Steel Braided - 79-93 Foxbody Brake Hose Set - Stainless Steel Braided - 79-93 Foxbody

Steeda

Brake Hose Set - Stainless Steel Braided - 79-93 Foxbody

$79.93

Russell's D.O.T. approved stainless steel brake lines virtually eliminate high pressure expansion providing greatly improved pedal feel and improved stopping power.  Also, these brake lines are significantly more durable than OE rubber lines being less...
Front Brake Hose Set - left & right - Centric Front Brake Hose Set - left & right - Centric

Altered Fox

Front Brake Hose Set - left & right - Centric

$39.89

Please replace the factory brake lines in your foxbody, because +/- 30 years of deterioration can lead to cracking and leaking.  Altered Fox has a great deal on this set of left and right front...