Rear Stainless Steel Braided Hoses for Foxbody with Cobra Rear Disc Brakes
$84.93
You'll need a set of these brake hoses when doing a disc brake conversion on the rear of your foxbody. ...
You'll need a set of these brake hoses when doing a disc brake conversion on the rear of your foxbody.
- Correct hoses for the Cobra Rear brake conversion
- Banjo fittings on caliper side, 3/8" fittings for hardline connection.
- Hose set includes banjo bolts and copper crush washers
- DOT approved
California Residents: Cancer and Reproductive Harm WARNING: www.p65warnings.ca.gov
Related Products
Order online and have your products delivered to your closest store for free
-30%
Proportioning Valve Plug M-2450-A
You'll need this foxbody Mustang proportioning valve plug when converting your 79-93 Mustang to 4-wheel disc brakes. This seals the factory proportioning/combination valve. The original Ford part number is M-2450-A, but...
-30%
$13.93
$19.98
Brake Light Switch
Keep you and your car safe with a new foxbody direct replacement brake light switch! The brake light switch is located behind the brake pedal and when pushed sends a signal...
$12.93
Brake Line Caps by CaPlug
These 7/16-24 plugs are handy to have around when swapping your front brake hoses or doing a major frontend overhaul. The plugs allow you to remove the hose without draining...
$4.93
Brake Dust Shield Bolt Kit
Replace your rusted or missing bolts with the perfect set from Foxbody Performance. Zinc plated to help prevent rust, corrosion and seizing. Larger head than OE California...
$9.93
Brake Calipers, Left & Right, 87-89 Mustang 5.0
New Or Remanufactured: Remanufactured Bracket Included: No Caliper And Pad Hardware Included: No Bracket Mounting Bolts Included: No Pads Included: No Color: Gray Finish: Rust Preventative Number Of Pistons: 1...
$144.89
Brake Hose Locking Clips
When swapping out your brake hoses, go ahead and clean up the place with these new brake hose locks from Foxbody Performance! These secure the brake hose to the bracket...
$3.49
Master Cylinder (15/16") with Hard-line Conversion for 87 to 93 Foxbody Mustang
This setup is the cleanest and easiest way to install a 15/16" (94-95) Mustang Cobra master cylinder on your 87-93 Foxbody Mustang! The kit includes:15/16" Cobra Master Cylinder3 Hard lines...
$169.99
Centric Foxbody Mustang Brake Master Cylinder
If your foxbody could use a brake update due to a leaking or worn out master cylinder, replace it with this quality unit from Centric Parts! These master cylinders are...
$84.93
Sleeve High Neck Bodycon Dress
$132.00
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nam fringilla augue nec est tristique auctor. Donec non est at libero.